HOME SUPPLIES SERVICES PONDS VERSA-LOK / OMNI-STONE
phone (724)743-4550   fax (724)743-4552  Email
     
 
Versa-Lok Material Estimating
 
Area of wall in square feet x 1.5 = # of units needed
Pins= 2 per block
C caps: Total Linear feet of wall x .75
Adhesive: Linear feet of wall divided by 14 = number of 11 oz. tubes
   VERSA-TUFF® Pins

Non-corrosive, nylon/fiberglass VERSA-TUFF Pins provide consistent alignment in standard VERSA-LOK Retaining Wall Systems. VERSA-TUFF Snap-off Pins are used for Accent, Cobble and Mosaic Retaining Wall Systems.

  
   VERSA-LOK® Concrete Adhesive:

A single-component, non-sag elastomer, VERSA-LOK Concrete Adhesive is designed for use in non-traffic bearing joints, including those where structural movement or stress is expected. Each VERSA-LOK Concrete Adhesive cartridge contains enough adhesive to cap approximately 14 lineal feet of wall.

  
Standard Unit Measurements:
   
     

Height: 6" (152.4mm)
Width (face): 16" (406.4mm)
Width (rear): 14" (355.6mm)
Depth: 12" (304.8mm)
Face area: 2/3 sq. ft. (.062 sq m)
Weight: 82 lbs. (37.19kg)
Weight/Face Area: 123 lbs./sq. ft (599.84kg/sq m)